Summary of 30 years experience:
• Power Distribution, MCC’s and ETAP software
• Start-up and Production support
• Packaging, Automotive, and Assembly applications
• Food/beverage, Dairies, Candy
• Nuclear and Non-Nuclear Plant, LNG, Chemical Plants and Oil and Gas
• Electrical Engineering Manager, E & I Manager, Project Manager, Maintenance Manager and Supervision of Technicians, Electrical Engineer/Designer and Controls Engineer – Controls and Automation
• FEED Studies, Specification of Instruments, Loop drawings, P&ID’s, I/O details/drawings, installation/calibration and trouble shooting of Instruments, documentation and instruction to others
• Programming of PLC’s, MMI configuration and SCADA systems including: A and B products from SLC SERIES to Control Logics, GE FANUC 90-70, 90-30 Series, Siemens PLC's, Texas Instruments PLC's, Westinghouse PLC, MODICON PLC, Direct Logic. DCS Foxboro, Yokoawa
MMI’s and HMI including: Review, Panelview, Panelmate, Wonderware and Factory Talk.
• Drives including Emerson, ABB, AB
• AutoCad,OrCad, DOORS, CAN and Microsoft software
• (Devicenet, Controlnet, Ethernet and Profibus, Intools and Smart Plant 3 D
• Was in charge of Projects from a few thousand dollars to 140 million dollars.
• Up to date TWIC
EXPERIENCE:
WIPP (URS) Carlsbad, NM Sr Electrical Engineer SME 04/14 to 10/16
Was employed by URS as a Subject Mater Expert Electrical Engineer to the Engineering Department at WIPP. My main responsibility included retrofitting, specification, scope of work, procedures, design, documentation and architecture of electrical equipment used in a new Interim Ventilation System (IVS). The IVS supplied fresh air for all personnel working in the mine. Some of the electrical equipment consist of the following: SEL relays and Ion Power Monitoring Meters for used in Switch Gear, ABB 500kVA Transformers, Eaton MCC’s, ABB 550 VFD’s, AB 1756,1715 redundancy safety rated PLC’s and Rosemont Instrumentation. All equipment was SIL 2 rated where required. I also attended all FAT’s, held design meetings and instructed other WIPP personal. I was reasonable for testing, start-up and operations of IVS. Contract ended due to lack of funding from DOE.
Caterpillar CPGS Group, Houston, Tx Sr Electrical Engineer 03/13 to 01/14
Working on contract as a Sr Electrical Engineer in charge of a 65MW Power Plant Project for a Company in Alberta, Canada. Selected the Vendors to provide and approved all Med Voltage, PCR, Controls, Instrumentation and Automation used on the Project. This included site visits to both Canada and Germany. Contract will expire Jan. 2014
Tellepsen Engineering Pasadena, Tx Sr Electrical Engineer 10/12 to 02/13
Working on a contract to perm position as a Lead Electrical Engineer in charge of E/I work pertaining to mid stream oil/gas operations including wireless Projects
APPLIED CONSULTANTS,INC RICHARDSON, TX Sr Consultant (Electrical Engineer) 07/12 to 10/12
Worked as a Lead/Sr E/I Engineer for a small Engineering Firm dealing most with mid-stream oil/gas projects and wireless tank farms. Setting up Company Electrical Standards and procedures. Company was very small and could provide enough work to afford a Sr Electrical Engineer on the pay roll. This was a contract position.
WESTERN REFINERY GALLUP,NM Lead Project Engineer 04/12 to 07/12 (SWDS Houston)
Was in charge of Feed studied needed for upcoming shut down. Work consist of meeting with Management of Company, Staff, Engineers and E/I personal. Provided information to various vendors and upcoming work schedule in Microsoft Project. Was informed that Contract would expire 1st of July. This was a contract position.
JACOBS ENGINEERING BATON ROUGE,LA Project Manager 02/12 to 04/12
Expertise was needed due to over load of Electrical Projects .Attended meetings with Engineering Staff, Clients and other Team Members. Outlined work to be completed, time frame, budget and other outside contractors that would be used to complete the Projects. Wrote SOP and other Engineering Documentation. This was a Contract position during Project overload.
PROJECT DESIGN GROUP Mobile, AL E/I Manager 09/11 to 02/12
PDG does work in the Oil/Gas, Paper Mills, Chemical Plants and other fields. PDG is a small full service Engineering Company. I am responsible for all E/I work with a staff of 2 Electrical Engineers and 4 Electrical Designers. Work consist of Project Management, devolvement of a E/I Staff, Team meetings and working with Clients. This was a contract position in which my expertise was need due to new Projects.
ASCEND MATERIALS Decatur, AL Lead Instrumentation Engineer 04/11 to 08/11
Contractor implementing front end engineering for major expansion of a large Chemical Plant. Duties consist
of developing Instrument list, Loop diagrams, I/O list, SOW, Estimation of cost and walk down of area. Implement and help to instruct a new Delta V system with Charms and SIS replacing an old Fisher Profox DCS. Conduct meetings with Plant personnel and other team members. Contract was completed .
SELF-EMPLOYED Tulsa, OK Electrical Contracting 03/09 to 03/11
Electrical Contracting using AutoCAD for design of Power Distribution, MCC’s, Control Panel Layout, BOM,
Electrical Control drawings, I/O Layout. Work was done on a Contract.
MATRIX SERVICE COMPANY Tulsa, OK SR Electrical Engineer Manager 07/08 to 02/09
Was hired by Matrix as full time Senior Electrical Engineer after completing a project at the LNG
Plant in Port Arthur, TX. My duties at the Corporate Office were to be the only source for company wide
electrical and instrumentation referring to any and all Projects that required my knowledge. While at Matrix, I developed numbering and file system for all electrical projects, wrote electrical standards and SOP’s . Returned to Port Arthur and supervised the electrical repairs caused by IKE. Matrix could not break into the Electrical Engineering field and I was laid off.
TRILLIUM CONSTRUCTION (Matrix Service Company) Port Arthur, TX E/I Manager 11/07 to 06/08
I was a contractor to Matrix Service Company as an E/I Electrical Engineering Manager.
Responsibilities included all E/I design, installation, calibration, walk down and turn over to Client three Tanks. Tanks had the capacity of 2.6 Bcf/d. Supervised two Field Engineers other sub-contractors along with sixty-two Electrical and twenty-five personnel under my direction. Served as the only Electrical Engineer on Staff for Matrix. Attended Staff meetings, Conducted E/I Construction meetings and Client meetings. Provided documentation concerning all E/I material used during construction to Client. Followed all DOE, NEC, ISA, IEEE and other Federal Codes on this Project. Contract completed and hired by Matrix
AMEC COMPANY Phoenix, AZ Electrical Engineer 01/07 to 11/07
INDEPENDENT CONTRACTOR
Assist in Design, Development and Drawings to include single line, Electrical wiring and diagrams, cable tray drawings, cable schedules from MCC to Equipment including Controls...
Login or Register to view the full resume.
